{"title":"Cable Avoidance","description":null,"products":[{"product_id":"c-scope-100mm-signal-clamp","title":"C.Scope YIRC-33-8 Signal Clamp","description":"\u003cp\u003eHoused in robust plastic with spring enhanced jaws, the C.Scope Signal Clamp is the perfect way to create a signal where it may be impossible or unsafe to use the direct cable, such as telecom or live power cables.\u003c\/p\u003e\u003cp\u003eThe 100mm diameter allows it to be clipped to the outside of the services with the signal generated having no effect on the current service.\u003c\/p\u003e\u003cp\u003eIdeal for use with C.Scope signal generators.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ch2\u003e\u003cstrong\u003eRobust Plastic Housing\u003c\/strong\u003e\u003c\/h2\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ch2\u003e\u003cstrong\u003e100mm Diameter\u003c\/strong\u003e\u003c\/h2\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ch2\u003e\u003cstrong\u003eSpring Enhanced Jaws\u003c\/strong\u003e\u003c\/h2\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ch2\u003e\u003cstrong\u003eCompatable with 33kHz Signal Generators\u003c\/strong\u003e\u003c\/h2\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315230490966,"sku":"YIRC-33-8","price":278.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"c-scope-33khz-sonde-general-purpose","title":"C Scope 33Khz Sonde General Purpose YIRS-33","description":"\u003cp\u003eA C.Scope 33kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a C.Scope \u003ca href=\"http:\/\/jbsalessurveyequipment.co.uk\/product\/c-scope-cxl4-cable-avoidance-tool\/\"\u003eLocator\u003c\/a\u003e set to Generator\/ Transmitter Mode. The location of a pipe blockage can be identified using this system with enormous cost saving potential.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOrange case to identify the 33kHz version.\u003c\/p\u003e \u003cp\u003e33kHz transmit signal allowing detection and tracing.\u003c\/p\u003e \u003cp\u003eSimple to use.\u003c\/p\u003e \u003cp\u003eVery robust.\u003c\/p\u003e \u003cp\u003eSingle AA battery operation.\u003c\/p\u003e \u003cp\u003eFully weatherproof design to IP65.\u003c\/p\u003e \u003cp\u003eAdaptors available for different Drain Rod types.\u003c\/p\u003e","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315244515670,"sku":"sonde33","price":311.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"c-scope-50m-plastic-pipe-tracer","title":"C Scope 50m Plastic Pipe Tracer","description":"","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315258999126,"sku":"YIRPPT50-33","price":450.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"c-scope-80mtr-flexible-tracer","title":"C Scope 80Mtr Flexible Tracer","description":"\u003cp\u003eThe Flexible Tracer is highly effective at locating and tracing the route of small diameter, non-metallic ducts, pipes, sewers and drains.\u003c\/p\u003e \u003cp\u003eWhen used with any C.Scope \u003ca href=\"http:\/\/jbsalessurveyequipment.co.uk\/product\/c-scope-dxl4-cable-avoidance-tool\/\"\u003eCable Locator\u003c\/a\u003e and \u003ca href=\"http:\/\/jbsalessurveyequipment.co.uk\/product\/c-scope-sgv4-signal-generator\/\"\u003eSignal Generator\u003c\/a\u003e, both the route of a non-metallic pipe and a particular end point can be pinpointed with the Flexible Tracer. This is particularly useful for identifying the position of any blockages or obstructions within the pipe. If a depth measuring Locator is being used then it is also possible to know the depth of the pipe\/blockage.\u003c\/p\u003e \u003cp\u003eThe Flexible Tracer is lightweight and compact making it very easy to transport. It comprises a 6mm diameter, 80m long continuous fibreglass rod housed in a strong reel that rotates on an axle. The axle has a slip-ring allowing the \u003ca href=\"http:\/\/jbsalessurveyequipment.co.uk\/product\/c-scope-sga4-signal-generator\/\"\u003eSignal Generator\u003c\/a\u003e to remain connected to the Connection Terminals of the Flexible Tracer whilst it is being inserted into the pipe to be traced. A tiny Sonde is built into the tip of the Flexible Tracer allowing the end point of the Tracer to also be located. Uniquely, this Sonde is also flexible allowing the Flexible Tracer to negotiate bends in a pipe that would ordinarily stop a conventional Sonde from getting past.\u003c\/p\u003e \u003cp\u003eThere are two main methods for tracing the route of non-metallic pipes using the Flexible Tracer:\u003c\/p\u003e \u003cp\u003eLine Location – Feed the rod into the pipe\/duct and attach one Direct Connection lead of a \u003ca href=\"http:\/\/jbsalessurveyequipment.co.uk\/product\/c-scope-sga3-signal-generator\/\"\u003eSignal Generator\u003c\/a\u003e to one connection terminal of the Tracer and the other Direct Connection lead to an Earth Stake. The Rod can then be located thus identifying the route of the pipe.\u003c\/p\u003e \u003cp\u003eTip\/Sonde Location – Feed the rod into the pipe\/duct and attach one Direct Connection lead of a \u003ca href=\"http:\/\/jbsalessurveyequipment.co.uk\/product\/c-scope-sga4-signal-generator\/\"\u003eSignal Generator\u003c\/a\u003e to one connection terminal of the Tracer and the other Direct Connection lead to the other terminal. This energizes the Sonde at the tip of the Flexible Tracer allowing the end point and the depth of the Flexible Tracer to be identified.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFibreglass rod inside a drum cage mounted in a tubular steel frame.\u003c\/p\u003e \u003cp\u003e80m of 5mm diameter flexible fibreglass rod with fully integrated 7.5mm diameter Sonde.\u003c\/p\u003e \u003cp\u003eIntegral Sonde for tip tracing.\u003c\/p\u003e \u003cp\u003eIntegral wire for line tracing.\u003c\/p\u003e \u003cp\u003eSlip Ring allowing drum rotation when in use.\u003c\/p\u003e \u003cp\u003eRotation brake.\u003c\/p\u003e \u003cp\u003eUnique flexible Sonde performs even in tight angles.\u003c\/p\u003e \u003cp\u003eRobust but lightweight construction.\u003c\/p\u003e","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315273056598,"sku":"yIRRfT80","price":750.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"c-scope-signal-injector-33khz-8khz","title":"C Scope Signal Injector 33KHz- 8KHz YIRIP-33","description":"\u003cp\u003eApply the signal from your C.Scope Genny or transmitter safely to an electrical system with this signal injector accessory. The signal injector connects via a standard UK mains socket, allowing the signal to be detected on the buried supply cable outside the building.\u003c\/p\u003e\u003ch3\u003eFEATURES\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUK Plug\u003c\/li\u003e\n\u003cli\u003eIP54 Rating\u003c\/li\u003e\n\u003cli\u003e42 Vrms Maximum Voltage\u003c\/li\u003e\n\u003cli\u003e33kHz Frequency\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315332268374,"sku":"YIRIP-33","price":172.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"c-scope-sonde-spring-coupler","title":"C.SCOPE SONDE SPRING COUPLER YIRS-SPC","description":"\u003cp\u003eThe C.Scope YIRS-SPC Spring Coupling for Sondes is a useful flexible adaptor for C.Scope Sondes which allows them to negotiate corners and obstructions in underground metal or plastic piping.\u003c\/p\u003e\u003cp\u003eC.Scope part number: YIRS-SPC\u003c\/p\u003e","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315347243350,"sku":"YIRS-SPC","price":100.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"c-scope-yirsd-33-duct-sonde","title":"C.Scope YIRSD-33 Duct Sonde","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThe duct sonde is designed specifically for tracing cable ducts that are already filled with cables.\u003c\/p\u003e\u003cp\u003eIts long, thin construction makes it ideal for use as such.\u003c\/p\u003e\u003cp\u003eScrew the sonde onto the end of a duct rod and push down the duct to trace the direction with a C.Scope locator in Generator\/Transmitter mode.\u003c\/p\u003e\u003cp\u003eIdentity and locate blockages with this method, providing a huge cost saving potential.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003eRobust, Waterproof Construction\u003c\/li\u003e\n\u003cli\u003e2m Range, up to 4.5m with MXL\u003c\/li\u003e\n\u003cli\u003e1 x AAA Alkaline Battery\u003c\/li\u003e\n\u003cli\u003eIP65 Water Protection\u003c\/li\u003e\n\u003cli\u003eLow Battery Signal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315375980886,"sku":"YIRSD-33","price":428.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"cable-detection-ezicat-xf-series","title":"Cable Detection EZiCAT xf Series","description":"\u003cp\u003e\u003cstrong\u003eAdvanced buried service location technology\u003c\/strong\u003e\u003cbr\u003e\nThe EZiCAT xf series cable locators represent the latest design in cable location technology. With state‐of‐the art digital signal processing (DSP) and intelligent software, the EZiCAT xf‐Series locators make ground surveys a simple and speedy task; increasing onsite safety and ultimately saving time and money.\u003c\/p\u003e \u003cp\u003eThe\u003cstrong\u003e Network Rail approved\u003c\/strong\u003e cable locators are suitable for a wide range of applications and can be used with the EZiTEX xf-Series signal transmitters and EZiSYSTEM accessories for increased accuracy and applications.\u003c\/p\u003e \u003cp\u003eThe EZiCAT locates buried conductive services by receiving electromagnetic signals which radiate from them. The EZiCAT’s intelligent software interprets the signals and provides the operator with an audible and visual response to the position and direction of the buried services.\u003cbr\u003e\nBuried service location has never been so easy.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEZiCAT Intelligent Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAll EZiCAT xf-Series locators always start in the last mode used and come with two lower frequencies (512Hz and 640Hz), making them ideal for tracing buried utilities over long distances.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAutomatic Controls\u003c\/strong\u003e\u003cbr\u003e\nMaking the EZiCAT easy to use, requiring minimal user training.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStarts in Power Mode\u003c\/strong\u003e\u003cbr\u003e\nEnsures the most potentially dangerous current carrying services are detected first for maximum operator safety.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAuto Mode\u003c\/strong\u003e\u003cbr\u003e\nAutomatically locates power or radio signals, helping to confirm the presence of services upon initial site occupation making cable detection easier and safer!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHazard Zone\u003c\/strong\u003e\u003cbr\u003e\nBuried utilities close to the surface pose a significant safety risk to site works. The Hazard Zone function provides an additional warning to the close proximity of buried services, alerting users to the immediate danger.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePinpoint Assist\u003c\/strong\u003e\u003cbr\u003e\nMaintains the highest peak reading obtained on the signal strength indicator for a period of time, allowing the operator to quickly and accurately pinpoint the service position.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIn‐built Test Function\u003c\/strong\u003e\u003cbr\u003e\nAllowing operators to test the hardware and software functionality of the EZiCAT before use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eService Due Indicator\u003c\/strong\u003e\u003cbr\u003e\nWrench icon displayed after 12 months.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHighly Visible Digital LCD Display\u003c\/strong\u003e\u003cbr\u003e\nWith built‐in light sensor, automatically enabling the backlight in dark conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRobust, Light Weight Design\u003c\/strong\u003e\u003cbr\u003e\nEZiCAT xf‐Series locators are specifically engineered for tough site conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAdditional Information\u003c\/strong\u003e\u003cbr\u003e\nDual mode active tracing for on‐site flexibility\u003cbr\u003e\nControls: On\/Off, Mode select, ’i‐button’ Information select \u0026amp; view\u003cbr\u003e\nFrequencies: Power 50\/60 Hz, Radio 15‐60 kHz, Generator 8kHz, 33kHz, 512Hz, 640Hz\u003cbr\u003e\nDepth range: Power\/Generator 3 metres, Radio 2 metres\u003cbr\u003e\nDust and water protection to IP54\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55315390857558,"sku":null,"price":645.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"cxl4-cable-avoidance-tool","title":"CXL4 CABLE AVOIDANCE TOOL","description":"\u003cp\u003eThree versions of the CXL4 are available; the standard CXL4, the CXL4-D which has full data logging capability, and the CXL4-DBG which has full data logging capability, Bluetooth™ connectivity and GPS.\u003c\/p\u003e \u003cp\u003eInnovative new features have been introduced and the popular existing modes of detection have been enhanced to allow the CXL4 Cable Avoidance Tool to successfully detect even the hardest to find pipes and cables. Particular attention has been paid to effect better working practices and to minimise the potential for human error to impact on operating performance.\u003c\/p\u003e \u003cp\u003eIMPROVED PERFORMANCE ACROSS ALL FOUR DETECTION MODES\u003cbr\u003eThe CXL4 Cable Avoidance Tool has improved performance across all modes of detection; Power, Radio, Generator and AllScan, whilst remaining easy to operate ensuring there is only a minimal need for training or retraining.\u003c\/p\u003e \u003cp\u003eSIMULTANEOUS DUAL-FREQUENCY\u003cbr\u003eThe simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOVERLOAD PROTECTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOptimised Locator Sensitivity and Noise Rejection means that the CXL4 can deal with the highest levels of background interference found, allowing even the weakest of signals to be detected successfully.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eINTELLIGENT NEW FEATURES:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eALARM ZONE\u003c\/strong\u003e\u003cbr\u003eAlarmZone™ alerts operators to the presence of particularly shallow pipes or cables with the exact trigger depth adjustable by the user to best suit local requirements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDYNAMIC SWING SENSOR\u003c\/strong\u003e\u003cbr\u003eThe Dynamic SwingSensor which gently alerts the operator if the locator is being swung excessively, potentially compromising the accuracy of any locates.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePEAKHOLD\u003c\/strong\u003e\u003cbr\u003ePeakHold allows operators to quickly and confidently pinpoint the exact position of buried services\u003c\/p\u003e \u003cp\u003eDATA LOGGING\u003cbr\u003eThe CXL4-D and CXL4-DBG Cable Avoidance Tools have full data logging capability. A years worth of data can be stored, in normal usage, on both the Cable Avoidance Tool and the SGV4 Signal Generator.\u003c\/p\u003e \u003cp\u003eDATA LOG TRANSFER via USB\u003cbr\u003eThis can be conveniently transferred at any time to supervisors for analysis via a USB cable to a PC (or wirelessly via Bluetooth™ from the DBG model only to a PC, tablet or smartphone).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDATA ANALYSIS\u003cbr\u003eC.SCOPE PC ‘TOOLKIT’ and ‘RELAY’ Smartphone App\u003c\/strong\u003e\u003cbr\u003eThe free-to-download C.Scope PC Toolkit and C.Scope Relay smartphone App analyses the stored data-logs into charts and graphs that illustrate all aspects of the use allowing training requirements to be quickly identified.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGPS\u003c\/strong\u003e\u003cbr\u003eThe CXL4-DBG with in-built GPS allows a record to be kept of exactly where the Locators have been used that can then be viewed in partnership with Google Earth™ or Google Maps™.\u003c\/p\u003e \u003cp\u003eTwelve months of GPS data is stored, in normal usage. This can be conveniently transferred at any time via a USB cable to a PC or wirelessly via Bluetooth™ to a PC, tablet or smartphone to supervisors for analysis. The free-to-download C.Scope PC Toolkit and Relay smartphone App analyses the stored data.\u003c\/p\u003e \u003cp\u003eAdditionally, the Locators can be paired to third party GPS Survey equipment, via the Locators in-built Bluetooth™ facilitating ‘one pass’ underground utility surveys to be undertaken.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCALIBRATION\u003c\/strong\u003e\u003cbr\u003eThe CXL4 Cable Avoidance Tools do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAUTOMATIC DAILY SELF TEST (ADST)\u003c\/strong\u003e\u003cbr\u003eThe CXL4 Cable Avoidance Tools perform an Automatic Daily Self Test (ADST). The ADST checks the functionality of the locator including the receiving aerials each day when it is first switched on. The SGV4 Signal Generator also performs a comprehensive Automatic Daily Self Test (ADST).\u003c\/p\u003e \u003cp\u003eAt the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.\u003c\/p\u003e \u003cp\u003eThe result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT VALIDATION CERTIFICATION\u003c\/strong\u003e\u003cbr\u003eThese test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available. The PC Toolkit can also be used to view and print a copy of the original factory Calibration Certificate.\u003c\/p\u003e \u003cp\u003eC.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal requirements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHIGH RESOLUTION BACKLIT DIGITAL DISPLAY\u003c\/strong\u003e\u003cbr\u003eThe CXL4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates detection mode, signal peak level, depth, signal strength and battery condition. It also displays the Automatic Daily Self Test results.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDETACHABLE SPEAKER\u003c\/strong\u003e\u003cbr\u003eThe speaker can be easily detached for use in noisy work environments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eROBUST AND DURABLE CONSTRUCTION\u003c\/strong\u003e\u003cbr\u003eThe CXL4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSERVICE\u003c\/strong\u003e\u003cbr\u003eA complete covers off service \u0026amp; maintenance package is available for those customers who require it from C.Scope Authorised Service Centres.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTHREE YEAR WARRANTY\u003c\/strong\u003e\u003cbr\u003eThe CXL4 comes with a three year Warranty (conditions apply).\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55315508363606,"sku":null,"price":924.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"dart-systems-4-5-6mm-sonde-adaptor-m5-m10","title":"Dart Systems 4.5\/6mm Sonde Adaptor M5\/M10","description":"\u003ch2\u003ePipeDart Sonde Adaptor for 4.5\/6mm Rod (M5\/M10)\u003c\/h2\u003e\u003cp\u003eThis is required to attach a Dart Rodding Sonde to a 4.5mm or 6mm Cobra Rod with an M5 End Fitting.\u003c\/p\u003e","brand":"Dart Systems","offers":[{"title":"Default Title","offer_id":55315522650454,"sku":null,"price":6.25,"currency_code":"GBP","in_stock":true}]},{"product_id":"dart-systems-9mm-120m-compact-cobra-duct-rod","title":"Dart Systems 9mm 120m Compact Cobra \/ Duct Rod","description":"\u003ch2\u003ePipeDart Compact 9mm Cobra\/Duct Rod\u003c\/h2\u003e \u003ch3\u003eA labour saving cable installation system\u003c\/h3\u003e \u003cp\u003eThe PipeDart Compact frame cobra rodding system gives a compact and labour saving solution for cable installation whether installing cables in ducts, threading draw ropes through pipes or when using with a Sonde transmitter for locating pipes and blockages.\u003c\/p\u003e \u003cp\u003eFeatures\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFast easy Cable Installation\u003c\/li\u003e \u003cli\u003eLight weight for easy transportation\u003c\/li\u003e \u003cli\u003eCage easily separates from frame\u003c\/li\u003e \u003cli\u003eIdeal for wiring of multi-storey office complexes, shopping malls and industrial sectors\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eConstruction\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRobust, zinc plated steel frame\u003c\/li\u003e \u003cli\u003eReliable\u003c\/li\u003e \u003cli\u003eHighest quality, fibreglass rod radially reinforced construction for strength and reliability during cable installation\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCost-effective\u003c\/p\u003e \u003cp\u003eFaster and more economic than screw together drain rods for cable pulling or rodding\u003c\/p\u003e \u003cp\u003eRod: Highest quality 9mm coated reinforced fibreglass rod\u003c\/p\u003e \u003cp\u003eFittings: Brass end fittings with smooth profile aluminium guiding tip\u003c\/p\u003e \u003cp\u003eFrame: Rugged steel construction, Zinc plated.\u003c\/p\u003e \u003cp\u003eDimensions (mm): 920 high x 820 width x 300 depth\u003c\/p\u003e \u003cp\u003eSafety Brake: Integral fully adjustable brake system fitted as standard\u003c\/p\u003e \u003cp\u003eWheels: Wheels fitted as standard\u003c\/p\u003e","brand":"Dart Systems","offers":[{"title":"Default Title","offer_id":55315536183638,"sku":"3c-9-120","price":349.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"dart-systems-9mm-200m-compact-cobra-duct-rod","title":"Dart Systems 9mm 200m Compact Cobra\/Duct Rod","description":"\u003ch2\u003ePipeDart Compact 9mm Cobra\/Duct Rod\u003c\/h2\u003e \u003ch3\u003eA labour saving cable installation system\u003c\/h3\u003e \u003cp\u003eThe PipeDart Compact frame cobra rodding system gives a compact and labour saving solution for cable installation whether installing cables in ducts, threading draw ropes through pipes or when using with a Sonde transmitter for locating pipes and blockages.\u003c\/p\u003e \u003cp\u003eFeatures\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFast easy Cable Installation\u003c\/li\u003e \u003cli\u003eLight weight for easy transportation\u003c\/li\u003e \u003cli\u003eCage easily separates from frame\u003c\/li\u003e \u003cli\u003eIdeal for wiring of multi-storey office complexes, shopping malls and industrial sectors\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eConstruction\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRobust, zinc plated steel frame\u003c\/li\u003e \u003cli\u003eReliable\u003c\/li\u003e \u003cli\u003eHighest quality, fibreglass rod radially reinforced construction for strength and reliability during cable installation\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCost-effective\u003c\/p\u003e \u003cp\u003eFaster and more economic than screw together drain rods for cable pulling or rodding\u003c\/p\u003e \u003cp\u003eRod: Highest quality 9mm coated reinforced fibreglass rod\u003c\/p\u003e \u003cp\u003eFittings: Brass end fittings with smooth profile aluminium guiding tip\u003c\/p\u003e \u003cp\u003eFrame: Rugged steel construction, Zinc plated.\u003c\/p\u003e \u003cp\u003eDimensions (mm): 920 high x 820 width x 300 depth\u003c\/p\u003e \u003cp\u003eSafety Brake: Integral fully adjustable brake system fitted as standard\u003c\/p\u003e \u003cp\u003eWheels: Wheels fitted as standard\u003c\/p\u003e","brand":"Dart Systems","offers":[{"title":"Default Title","offer_id":55315550634326,"sku":null,"price":472.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"dart-sytems-6mm-80m-cobra-duct-rod-cable-puller","title":"Dart Sytems 6mm – 80M Cobra \/ Duct Rod Cable Puller","description":"\u003ch2\u003ePipeDart ‘Ferret’ 6mm Cobra\/Duct Rod\u003c\/h2\u003e \u003ch3\u003eA labour saving cable installation system\u003c\/h3\u003e \u003cp\u003eThe PipeDart ‘Ferret’ Cobra\/Duct Rod systems are available in 6mm diameter rod and gives a compact and labour saving solution for cable installation whether installing cables in ducts, threading draw ropes through pipes or when using with a \u003ca href=\"https:\/\/www.dartsystems.co.uk\/products\/cable-pulling-tools-equipment\/location-systems\/sondes-signal-transmitters\"\u003eSonde \u003c\/a\u003etransmitter for locating pipes and blockages. Also known as Flex Rods these systems are designed to be rugged and long-lasting. These units are often used with a \u003ca href=\"https:\/\/www.dartsystems.co.uk\/products\/cable-pulling-tools-equipment\/cable-socks\/p-251-cable-grips-socks\"\u003eCable Sock\u003c\/a\u003e to aid pulling cables through ducts.\u003c\/p\u003e \u003cp\u003eFeatures\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFast easy Cable Installation\u003c\/li\u003e \u003cli\u003eLight weight for easy transportation\u003c\/li\u003e \u003cli\u003eCage easily separates from frame\u003c\/li\u003e \u003cli\u003eIdeal for wiring of multi-storey office complexes, shopping malls and industrial sector\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eConstruction\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRobust, zinc plated steel frames\u003c\/li\u003e \u003cli\u003eReliable\u003c\/li\u003e \u003cli\u003eHighest quality, fibreglass rod with a high resin content to ensure lateral strength\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCost-effective\u003cbr\u003e Faster and more economic than screw together drain rods for cable pulling or rodding\u003c\/p\u003e \u003cp\u003eRod: Highest quality 6mm coated reinforced fibreglass rod\u003cbr\u003eFittings:  Brass end fittings with smooth profile brass guiding tip\u003cbr\u003eFrame:  Rugged steel construction, Zinc plated.\u003cbr\u003eDimensions (mm): 700 high x 580 width x 250 depth\u003cbr\u003eSafety Brake: Integral fully adjustable brake system fitted as standard\u003c\/p\u003e","brand":"Dart Systems","offers":[{"title":"Default Title","offer_id":55315565150550,"sku":"3F-6-80","price":205.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ds-33khz-drainage-rodding-sonde","title":"DS 33Khz Drainage \/ Rodding Sonde","description":"\u003ch2\u003eDart Rodding Sonde 33kHz\u003c\/h2\u003e \u003ch3\u003eStandard UK Sonde Frequency\u003c\/h3\u003e \u003cp\u003eThe Dart Systems Rodding Sonde is a versatile and powerful, self-contained waterproof transmitter. The Sonde can be attached to Flex Rods, Cobra Rods, Drain Rods or any movable device that can be propelled inside non-metallic pipes. Used correctly you can pinpoint the exact route of the pipe and where a blockage is underground from above ground!\u003c\/p\u003e \u003cp\u003eThe Sonde emits a strong radio signal which can be tracked above ground using an industry standard Cable Avoiding Tool (CAT) or Cable Locator which operates at the same frequency. This 33Khz frequency is the UK standard Sonde frequency for most applications.\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55315650904406,"sku":null,"price":195.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"general-purpose-sonde-8khz","title":"C SCOPE 8KHZ SONDE","description":"\u003cp\u003eA C.Scope 8kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a C.Scope Precision Pipe and Cable MXL or MXL2 Locator. The location of a pipe blockage can be identified using this system with enormous cost saving potential.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eGreen case to identify the 8kHz version.\u003c\/li\u003e \u003cli\u003e8kHz transmit signal allowing detection and tracing by an MXL2 Pipe and Cable Locator.\u003c\/li\u003e \u003cli\u003eSimple to use.\u003c\/li\u003e \u003cli\u003eVery robust.\u003c\/li\u003e \u003cli\u003eSingle AA battery operation.\u003c\/li\u003e \u003cli\u003eFully weatherproof design to IP65.\u003c\/li\u003e \u003cli\u003eAdaptors available for different Drain Rod types.\u003c\/li\u003e \u003c\/ul\u003e","brand":"C.Scope","offers":[{"title":"Default Title","offer_id":55315737674070,"sku":null,"price":332.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"mxl4-locator","title":"MXL4-DBG LOCATOR","description":"\u003cp\u003eThe MXL4 Precision Locator represents a significant advance in cable detecting and tracing capabilities.\u003c\/p\u003e\u003cp\u003eThe MXL4-DBG which has full data logging capability, Bluetooth™ connectivity and GPS.\u003c\/p\u003e\u003cp\u003eInnovative new features have been introduced enabling the MXL4 Locator and MXT4 Transmitter to provide high-end precision performance and a far more flexible approach to pipe and cable location.\u003c\/p\u003e\u003cp\u003eIMPROVED PERFORMANCE\u003cbr\u003eThe MXL4 is able to quickly and accurately detect, pinpoint, trace and identify the widest range of pipes and cables.\u003c\/p\u003e\u003cp\u003eOVERLOAD PROTECTION\u003cbr\u003eOptimised Locator Sensitivity and Noise Rejection means that the MXL4 can deal with the highest levels of background interference found, allowing even the weakest of signals to be detected successfully.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMULTI-FREQUENCY\u003c\/strong\u003e\u003cbr\u003eThe MXT4 Transmitter now has a greater range of transmitting frequencies allowing improved long distance tracing and utility identification, even on the most congested of sites. A range of frequencies from 512\/640Hz up to 131kHz and including the simultaneous dual-frequency 33kHz and 131kHz signal output is ideal for maximising the number of buried services that can be energised and then detected. The MXL4 can apply these frequency signals without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDEPTH MEASUREMENT\u003c\/strong\u003e\u003cbr\u003eThe MXL4 when used alongside an MXT4 Transmitter will measure and indicate the depth of buried pipes, cables and sondes at the push of a button.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSIGNAL CURRENT MEASUREMENT\u003c\/strong\u003e\u003cbr\u003eThe MXL4 can monitor the true strength of the MXT4 Transmitter signal applied to a buried service irrespective of its depth. This is ideal for identifying the layout of a pipe or cable network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eINTELLIGENT NEW FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALARM ZONE\u003c\/strong\u003e\u003cbr\u003eAlarmZone™ alerts operators to the presence of particularly shallow pipes or cables with the exact trigger depth adjustable by the user to best suit local requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDYNAMIC SWING SENSOR\u003c\/strong\u003e\u003cbr\u003eThe Dynamic SwingSensor which gently alerts the operator if the locator is being swung excessively, potentially compromising the accuracy of any locates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePEAKHOLD\u003c\/strong\u003e\u003cbr\u003ePeakHold allows operators to quickly and confidently pinpoint the exact position of buried services\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDATA LOGGING\u003c\/strong\u003e\u003cbr\u003eThe MXL4-D and MXL4-DBG Locators have full data logging capability. A years worth of data can be stored, in normal usage, on both the Locator and the MXT4 Transmitter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDATA LOG TRANSFER via USB\u003c\/strong\u003e\u003cbr\u003eThis can be conveniently transferred at any time to supervisors for analysis via a USB cable to a PC (or wirelessly via Bluetooth™ from the DBG model only to a PC, tablet or smartphone).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDATA ANALYSIS\u003cbr\u003eC.SCOPE PC ‘TOOLKIT’ and ‘RELAY’ Smartphone App\u003c\/strong\u003e\u003cbr\u003eThe free-to-download C.Scope PC Toolkit and C.Scope Relay smartphone App analyses the stored data-logs into charts and graphs that illustrate all aspects of the use allowing training requirements to be quickly identified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGPS\u003c\/strong\u003e\u003cbr\u003eThe MXL4-DBG with in-built GPS allows a record to be kept of exactly where the Locators have been used that can then be viewed in partnership with Google Earth™ or Google Maps™.\u003c\/p\u003e\u003cp\u003eTwelve months of GPS data is stored, in normal usage. This can be conveniently transferred at any time via a USB cable to a PC or wirelessly via Bluetooth™ to a PC, tablet or smartphone to supervisors for analysis. The free-to-download C.Scope PC Toolkit and Relay smartphone App analyses the stored data.\u003c\/p\u003e\u003cp\u003eAdditionally, the Locators can be paired to third party GPS Survey equipment, via the Locators in-built Bluetooth™ facilitating ‘one pass’ underground utility surveys to be undertaken.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCALIBRATION\u003c\/strong\u003e\u003cbr\u003eThe MXL4 Cable Avoidance Tools do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAUTOMATIC DAILY SELF TEST (ADST)\u003c\/strong\u003e\u003cbr\u003eThe MXL4 Locators perform an Automatic Daily Self Test (ADST). The ADST checks the functionality of the locator including the receiving aerials each day when it is first switched on. The MXT4 Transmitter also performs a comprehensive Automatic Daily Self Test (ADST)\u003c\/p\u003e\u003cp\u003eAt the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.\u003c\/p\u003e\u003cp\u003eThe result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePRODUCT VALIDATION CERTIFICATION\u003c\/strong\u003e\u003cbr\u003eThese test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available. The PC Toolkit can also be used to view and print a copy of the original factory Calibration Certificate.\u003c\/p\u003e\u003cp\u003eC.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHIGH RESOLUTION BACKLIT DIGITAL DISPLAY\u003c\/strong\u003e\u003cbr\u003eThe MXL4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates detection mode, signal peak level, depth, signal strength and battery condition. It also displays the Automatic Daily Self Test results.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDETACHABLE SPEAKER\u003c\/strong\u003e\u003cbr\u003eThe speaker can be easily detached for use in noisy work environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eROBUST AND DURABLE CONSTRUCTION\u003c\/strong\u003e\u003cbr\u003eThe MXL4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSERVICE\u003c\/strong\u003e\u003cbr\u003eA complete covers off service \u0026amp; maintenance package is available for those customers who require it from C.Scope Authorised Service Centres.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTHREE YEAR WARRANTY\u003c\/strong\u003e\u003cbr\u003eThe MXL4 comes with a three year Warranty (conditions apply).\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55316872364374,"sku":null,"price":1605.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"radiodetection-cat4","title":"Radiodetection CAT4 (strike Alert)","description":"\u003cp\u003e\u003cstrong\u003eDetect More, Detect Faster\u003c\/strong\u003e\u003cbr\u003eThe new C.A.T4 digital platform delivers highly refined locate capabilities, specifically designed to help the operator find more buried utilities. The C.A.T4 Avoidance Mode™ lets the operator check an intended excavation area for Power, Radio and Genny signals, and pinpoint located utilities in a single scan. Features such as the bargraph ‘tidemark’ enable an operator to quickly spot a peak response and zero-in on a buried conductor.\u003c\/p\u003e\u003cp\u003eThe new Genny 4 (optional), with a new integrated logic design, provides a class-first simultaneous dual-frequency signal output design. Alongside the familiar 33kHz locate signal for general purpose locates, the Genny 4 transmits a second frequency designed to facilitate location of small diameter cables such as telecoms and street lighting, including spurs. For tricky locates, the new power boost function enables the locate signal to travel further and deeper, and couple onto utilities more easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDig More Safely\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s proprietary StrikeAlert™ has been improved to reduce the number of shallow cable strikes. The C.A.T4 guides users towards better and safer working practices through its optional SWING™ Rate detector and Service Due date warning.\u003c\/p\u003e\u003cp\u003eOptional data acquisition capabilities allow Plant Supervisors to administer their fleet more safely and effectively by providing comprehensive logs of C.A.T4 usage for analysis and personnel development.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStrikeAlert™ \u003c\/strong\u003e(optional)\u003cbr\u003eMinimise the risk of hitting a shallow cable with the optional StrikeAlert™ which has been enhanced and optimised to reduce the instances of false warnings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDynamic Overload Protection\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s unique digital signal processing capabilities equips the C.A.T4 with the ability to reject electrical interference. Dynamic Overload Protection gives C.A.T4 series products the ability to continue operating in electrically challenging areas, such as near substations and under power cables, where other locators’ detection circuitry may be overloaded and no longer function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvoidance Mode™ \u003c\/strong\u003e\u003cbr\u003eSweep an area of Power, Radio and Genny signals simultaneously, saving time. C.A.T4 lets operators control the sensitivity of each mode\/signal, enabling buried utilities to be pinpointed in a single pass, while Real Sound provides audio feedback derived directly from the utility located, easing identification to maximise speed whilst maintaining safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eeCert™\u003c\/strong\u003e\u003cbr\u003eeCert provides a fast and thorough test of key circuitry elements within C.A.T4, and validates their validation performance against the original factory calibration over the internet.\u003c\/p\u003e\u003cp\u003eeCert™, activated through the C.A.T Manager software, provides a fast, thorough and convenient test of the key locating circuitry within C.A.T4, and validates its performance against the original factory calibration. Following an eCert test pass, a Radiodetection Calibration Certificate for that C.A.T4 can be printed or saved.\u003c\/p\u003e\u003cp\u003eWhat’s more, C.A.T Manager can reproduce the original factory calibration certificate, or any eCert certificates that it has produced, on demand.\u003c\/p\u003e\u003cp\u003eFor a complete maintenance package, Radiodetection also offers exhaustive factory-backed service and recalibration options including full mechanical integrity inspection and function testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Visibility Display with Backlight\u003c\/strong\u003e\u003cbr\u003eThe C.A.T4’s high visibility display helps to minimise the possibility of misreading critical information from the unit. The high contrast and automatic backlight illumination provide optimum visibility in all light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC.A.T Manager™ Software\u003c\/strong\u003e (optional)\u003cbr\u003eC.A.T4 locators are supported with the dedicated C.A.T Manager software package. This Windows® PC program allows plant, fleet and site managers to minimise down time by performing software upgrades, sending a service request or reproducing calibration certificates. To match individual preferences or intended use, C.A.T Manager can disable or enable C.A.T4 features such as depth estimation and warnings. User-editable fields enable plant\/fleet codes and other details to be stored on the unit, simplifying records and traceability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenny4 Signal Boost\u003c\/strong\u003e\u003cbr\u003eThe Genny 4 offers, alongside its standard power mode, a Signal Boost feature which increases the output signal by up to 10 times allowing you to locate over extra distance and depth. Additionally, the simultaneous Small Diameter Locate frequency design aids detection of smaller cables including spurs.\u003c\/p\u003e","brand":"Radiodetection","offers":[{"title":"Default Title","offer_id":55316917354838,"sku":"10\/CAT4EN29","price":1012.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"radiodetection-gcat4-2","title":"Radiodetection GCAT4+","description":"\u003cp\u003e\u003cstrong\u003eDetect More, Detect Faster\u003c\/strong\u003e\u003cbr\u003eThe new C.A.T4 digital platform delivers highly refined locate capabilities, specifically designed to help the operator find more buried utilities. The C.A.T4 Avoidance Mode™ lets the operator check an intended excavation area for Power, Radio and Genny signals, and pinpoint located utilities in a single scan. Features such as the bargraph ‘tidemark’ enable an operator to quickly spot a peak response and zero-in on a buried conductor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDig More Safely\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s proprietary StrikeAlert™ has been improved to reduce the number of shallow cable strikes. The C.A.T4 guides users towards better and safer working practices through its optional SWING™ Rate detector and Service Due date warning.\u003c\/p\u003e\u003cp\u003eOptional data acquisition capabilities allow Plant Supervisors to administer their fleet more safely and effectively by providing comprehensive logs of C.A.T4 usage for analysis and personnel development.\u003c\/p\u003e\u003cp\u003eC.A.T4 is a safety-critical precision instrument and the optional 30-day countdown to the Service Due date, CALSafe™ and innovative eCert™ on-line system calibration validation capabilities are designed to reinforce company and recommended service policies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eData Acquisition\u003c\/strong\u003e\u003cbr\u003eeC.A.T4™ series products can store over a year’s worth of the key measurements and modes of operation. C.A.T Manager™ can be used to export log files to enable detailed data usage analysis offering multiple benefits such as identifying training and development needs, and providing independent historical records of the instrument’s use. Backed-up data on a PC gives virtually unlimited record keeping for the life of the product.\u003c\/p\u003e\u003cp\u003egC.A.T4 units are equipped with an internal GPS\/GNSS receiver providing positional data logged every second into the C.A.T4 internal memory and showing where the operator was working. gC.A.T4 data logs can be exported as CSV, XLM or KML files that can be imported into map services like Google Maps® or Google Earth®.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDynamic Overload Protection\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s unique digital signal processing capabilities equips the C.A.T4 with the ability to reject electrical interference. Dynamic Overload Protection gives C.A.T4 series products the ability to continue operating in electrically challenging areas, such as near substations and under power cables, where other locators’ detection circuitry may be overloaded and no longer function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvoidance Mode™ \u003c\/strong\u003e\u003cbr\u003eSweep an area of Power, Radio and Genny signals simultaneously, saving time. C.A.T4 lets operators control the sensitivity of each mode\/signal, enabling buried utilities to be pinpointed in a single pass, while Real Sound provides audio feedback derived directly from the utility located, easing identification to maximise speed whilst maintaining safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eeCert™\u003c\/strong\u003e\u003cbr\u003eeCert provides a fast and thorough test of key circuitry elements within C.A.T4, and validates their validation performance against the original factory calibration over the internet.\u003c\/p\u003e\u003cp\u003eeCert™, activated through the C.A.T Manager software, provides a fast, thorough and convenient test of the key locating circuitry within C.A.T4, and validates its performance against the original factory calibration. Following an eCert test pass, a Radiodetection Calibration Certificate for that C.A.T4 can be printed or saved.\u003c\/p\u003e\u003cp\u003eWhat’s more, C.A.T Manager can reproduce the original factory calibration certificate, or any eCert certificates that it has produced, on demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSWING™\u003c\/strong\u003e\u003cbr\u003eRadiodetection C.A.Ts are designed to respond exceptionally fast to even the smallest detectable underground signals. Radiodetection’s research into underground signal detection has shown that the ability of an operator to identify these buried utilities is directly affected by careless working practices such as excessive or rapid swinging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Visibility Display with Backlight\u003c\/strong\u003e\u003cbr\u003eThe C.A.T4’s high visibility display helps to minimise the possibility of misreading critical information from the unit. The high contrast and automatic backlight illumination provide optimum visibility in all light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenny4 Signal Boost\u003c\/strong\u003e\u003cbr\u003eThe Genny 4 offers, alongside its standard power mode, a Signal Boost feature which increases the output signal by up to 10 times allowing you to locate over extra distance and depth. Additionally, the simultaneous Small Diameter Locate frequency design aids detection of smaller cables including spurs.\u003c\/p\u003e","brand":"Radiodetection","offers":[{"title":"Default Title","offer_id":55316922204502,"sku":"10\/GCAT4+EN03","price":1662.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"radiodetection-sewer-sonde","title":"Radiodetection Sewer Sonde 10\/SONDE-SEWER-33","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThis Radiodetection sewer sonde comes in a strong enclosure, making it suitable for heavy duty use in sewer systems.\u003c\/p\u003e\u003cp\u003eThe sonde has a long life for everyday use in all conditions.\u003c\/p\u003e\u003cp\u003eRD part no: 10\/SONDE-SEWER-33\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e500g Weight\u003c\/li\u003e\n\u003cli\u003e1x 9v Alkaline Battery\u003c\/li\u003e\n\u003cli\u003e15 Hours Battery Life\u003c\/li\u003e\n\u003cli\u003e8m Location Depth (Minimum 0.5m)\u003c\/li\u003e\n\u003cli\u003e33kHz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radiodetection","offers":[{"title":"Default Title","offer_id":55316923941206,"sku":"10\/SONDE-SEWER-33","price":539.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"radiodetection-super-sonde","title":"RADIODETECTION SUPER SONDE 33kHz 10\/SONDE-SUPER-33","description":"\u003cp\u003eThe Radiodetection super sonde features a strong construction for use in deep sewers with its 15m location depth.\u003c\/p\u003e\u003cp\u003eRD part no: 10\/SONDE-SUPER-33\u003c\/p\u003e","brand":"Radiodetection","offers":[{"title":"Default Title","offer_id":55316926038358,"sku":"10\/SONDE-SUPER-33","price":713.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-11mm-100m-maxi-cobra-complete","title":"Ritelite 11MM 100M MAXI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Maxi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316937769302,"sku":"c0f3ee33922e","price":466.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-11mm-150m-maxi-cobra-complete","title":"Ritelite 11MM 150M MAXI COBRA COMPLETE","description":"","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316940194134,"sku":"4244504be178","price":552.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-11mm-50m-maxi-cobra-complete","title":"Ritelite 11MM 50M MAXI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Maxi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316942291286,"sku":"d6bb7d22a4c1","price":392.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-4-5mm-100m-midi-cobra-complete","title":"Ritelite 4.5MM 100M MIDI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Midi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316944650582,"sku":"771cc47fcfb5","price":220.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-4-5mm-150m-midi-cobra-complete","title":"Ritelite 4.5MM 150M MIDI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Midi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316946911574,"sku":"dbf08d278b98","price":257.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-4-5mm-50m-midi-cobra-complete","title":"Ritelite 4.5MM 50M MIDI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Midi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316949107030,"sku":"973872862d4a","price":183.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-6mm-100m-midi-cobra-complete","title":"Ritelite 6MM 100M MIDI COBRA COMPLETE","description":"","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316951662934,"sku":"75d451e07423","price":244.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-6mm-150m-midi-cobra-complete","title":"Ritelite 6MM 150M MIDI COBRA COMPLETE","description":"","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316953104726,"sku":"51c46b2e4f21","price":306.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-6mm-50m-midi-cobra-complete","title":"Ritelite 6MM 50M MIDI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Midi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316954841430,"sku":"32e6f3c6e920","price":195.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-9mm-100m-medi-cobra-complete","title":"Ritelite 9MM 100M MEDI COBRA COMPLETE","description":"","brand":"Komelon","offers":[{"title":"Default Title","offer_id":55316956578134,"sku":"a73db105e7e9","price":318.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-9mm-150m-medi-cobra-complete","title":"Ritelite 9MM 150M MEDI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Medi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316958085462,"sku":"5c20e859846d","price":416.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-9mm-200m-medi-cobra-complete","title":"Ritelite 9MM 200M MEDI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Medi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316959854934,"sku":"3bbc62c68397","price":440.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-9mm-50m-medi-cobra-complete","title":"Ritelite 9MM 50M MEDI COBRA COMPLETE","description":"\u003cp\u003eThe ‘Medi Cobra’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.\u003c\/p\u003e","brand":"Abtech","offers":[{"title":"Default Title","offer_id":55316962345302,"sku":"733d11479b21","price":244.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-sonde-adaptor-4-5-6mm-rod","title":"Ritelite SONDE ADAPTOR 4.5\/6mm ROD","description":"\u003cp\u003eSonde adaptor for Cobra rodding reels for attaching a sonde with a M10 connection to your rodding reel, available in a range of sizes to fit Cobras up to 11mm\u003c\/p\u003e","brand":"Ritelite","offers":[{"title":"Default Title","offer_id":55316963590486,"sku":"96f250125601","price":20.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ritelite-sonde-adaptor-9-11mm-cobra","title":"Ritelite SONDE ADAPTOR 9\/11MM COBRA","description":"\u003cp\u003eSonde adaptor for Cobra rodding reels for attaching a sonde with a M10 connection to your rodding reel, available in a range of sizes to fit Cobras up to 11mm\u003c\/p\u003e","brand":"Abtech","offers":[{"title":"Default Title","offer_id":55316965032278,"sku":"1d4630b3b986","price":20.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"self-adhesive-reflective-target-40mm-x-40mm","title":"SELF-ADHESIVE REFLECTIVE TARGET – 40MM X 40MM","description":"\u003cp\u003eThis reflective target is perfect for monitoring jobs where you need to leave targets in place for a long time. Easy-to-use self-adhesive reflective targets, which can be directly fixed to measuring points. These targets work with most EDMs and are ideal for monitoring work where you have to leave targets in position over long periods. Measuring 40 x 40mm in size, the retro target works with most EDMs.\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55316968210774,"sku":"41ffb3587a05","price":0.9,"currency_code":"GBP","in_stock":true}]},{"product_id":"universal-m10-sonde-adapter","title":"Universal M10 Sonde Adapter","description":"\u003ch2\u003eUniversal M10 Sonde Adaptor\u003c\/h2\u003e\u003cp\u003eThis is a Universal Bailey Rod Sonde Adapter. It fits the Bailey Universal Blue Rods and has an M10 Female thread at the end allowing the user to attach a Sonde for locating purposes.\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55317011562838,"sku":"3-BR-SA","price":17.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"vivax-100mm-signal-clamp-xlr","title":"VIVAX 100MM SIGNAL CLAMP XLR","description":"\u003cp\u003eSignal Clamps provides a precise way to apply a locating signal. It is generally used when it is not possible or convenient to access the conductor to make a direct connection but there is sufficient room to place the clamp around the cable or pipe, or when it is not safe to make a direct connection because the target cable is carrying electricity.\u003c\/p\u003e\u003cp\u003eSignal Clamps are specialized inductive devices, sometimes known as a toroid or coupler. All clamps are optimized to work at specific frequencies. In most cases clamps are designed to be used at frequencies generally between 8kHz and 83.1kHz.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange of clamps from 2” to 18”\u003c\/li\u003e\n\u003cli\u003eApply a transmitter signal to live cables\u003c\/li\u003e\n\u003cli\u003eApply locate signals on lines in a range of situations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vivax-Metrotech","offers":[{"title":"Default Title","offer_id":55317012611414,"sku":null,"price":209.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"vloc3-pro-receiver-vivax","title":"vLoc3-Pro Receiver Vivax","description":"\u003cp\u003eThe \u003cstrong\u003evLoc3-Pro\u003c\/strong\u003e utility locator introduces new innovative tools for locating buried utilities assuring damage prevention whilst gathering information for analysis.\u003c\/p\u003e\u003cp\u003eWith two sets of screened 3D antennas signal distortion is easily detected and displayed on the bright full colour display. Along with classic locate screens the vLoc3 series locators offer new locate perspective screens of Vector Locate for fully automatic non-walk over locating, Transverse Graph showing both peak and null simultaneously providing immediate measurement of signal distortion, Plan View showing the relative orientation of the cable at any angle, and a new graphical Sonde screen with guidance arrows leading to the sonde location even when it is vertical.\u003c\/p\u003e\u003cp\u003eThe highly user configurable vLoc3 series contains eight passive locate modes, fault-find mode, SD (showing direction of outgoing current), and a range of configurable frequencies from 98Hz to 200 kHz. Audio and mechanical vibration alerts can also be configured by the user providing warnings for shallow depth, overload, overhead cables, and excessive swinging. Plug-in-play options for the receiver include optional Bluetooth module useable with external GPS devices and EMS foot to locate buried markers.\u003c\/p\u003e\u003cp\u003evLoc3-Pro Brochure  \u003ca href=\"https:\/\/reconsurveyandsafety.co.uk\/wp-content\/uploads\/2024\/10\/vloc3-pro-sales-sheet_1.pdf\"\u003evloc3-pro-sales-sheet_1\u003c\/a\u003e\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Locator Only","offer_id":55317014806870,"sku":null,"price":1942.99,"currency_code":"GBP","in_stock":true},{"title":"Transmitter","offer_id":55317014839638,"sku":null,"price":2992.99,"currency_code":"GBP","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1060\/4530\/9270\/collections\/shopping_6b0c1be8-d184-407f-b3a0-160f65e6509a.webp?v=1790024661","url":"https:\/\/reconsurveyandsafety.co.uk\/collections\/cable-avoidance.oembed","provider":"Recon Survey \u0026 Safety","version":"1.0","type":"link"}