{"title":"Locators","description":null,"products":[{"product_id":"cable-detection-ezicat-xf-series","title":"Cable Detection EZiCAT xf Series","description":"\u003cp\u003e\u003cstrong\u003eAdvanced buried service location technology\u003c\/strong\u003e\u003cbr\u003e\nThe EZiCAT xf series cable locators represent the latest design in cable location technology. With state‐of‐the art digital signal processing (DSP) and intelligent software, the EZiCAT xf‐Series locators make ground surveys a simple and speedy task; increasing onsite safety and ultimately saving time and money.\u003c\/p\u003e \u003cp\u003eThe\u003cstrong\u003e Network Rail approved\u003c\/strong\u003e cable locators are suitable for a wide range of applications and can be used with the EZiTEX xf-Series signal transmitters and EZiSYSTEM accessories for increased accuracy and applications.\u003c\/p\u003e \u003cp\u003eThe EZiCAT locates buried conductive services by receiving electromagnetic signals which radiate from them. The EZiCAT’s intelligent software interprets the signals and provides the operator with an audible and visual response to the position and direction of the buried services.\u003cbr\u003e\nBuried service location has never been so easy.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEZiCAT Intelligent Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAll EZiCAT xf-Series locators always start in the last mode used and come with two lower frequencies (512Hz and 640Hz), making them ideal for tracing buried utilities over long distances.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAutomatic Controls\u003c\/strong\u003e\u003cbr\u003e\nMaking the EZiCAT easy to use, requiring minimal user training.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStarts in Power Mode\u003c\/strong\u003e\u003cbr\u003e\nEnsures the most potentially dangerous current carrying services are detected first for maximum operator safety.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAuto Mode\u003c\/strong\u003e\u003cbr\u003e\nAutomatically locates power or radio signals, helping to confirm the presence of services upon initial site occupation making cable detection easier and safer!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHazard Zone\u003c\/strong\u003e\u003cbr\u003e\nBuried utilities close to the surface pose a significant safety risk to site works. The Hazard Zone function provides an additional warning to the close proximity of buried services, alerting users to the immediate danger.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePinpoint Assist\u003c\/strong\u003e\u003cbr\u003e\nMaintains the highest peak reading obtained on the signal strength indicator for a period of time, allowing the operator to quickly and accurately pinpoint the service position.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIn‐built Test Function\u003c\/strong\u003e\u003cbr\u003e\nAllowing operators to test the hardware and software functionality of the EZiCAT before use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eService Due Indicator\u003c\/strong\u003e\u003cbr\u003e\nWrench icon displayed after 12 months.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHighly Visible Digital LCD Display\u003c\/strong\u003e\u003cbr\u003e\nWith built‐in light sensor, automatically enabling the backlight in dark conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRobust, Light Weight Design\u003c\/strong\u003e\u003cbr\u003e\nEZiCAT xf‐Series locators are specifically engineered for tough site conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAdditional Information\u003c\/strong\u003e\u003cbr\u003e\nDual mode active tracing for on‐site flexibility\u003cbr\u003e\nControls: On\/Off, Mode select, ’i‐button’ Information select \u0026amp; view\u003cbr\u003e\nFrequencies: Power 50\/60 Hz, Radio 15‐60 kHz, Generator 8kHz, 33kHz, 512Hz, 640Hz\u003cbr\u003e\nDepth range: Power\/Generator 3 metres, Radio 2 metres\u003cbr\u003e\nDust and water protection to IP54\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55315390857558,"sku":null,"price":645.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"cxl4-cable-avoidance-tool","title":"CXL4 CABLE AVOIDANCE TOOL","description":"\u003cp\u003eThree versions of the CXL4 are available; the standard CXL4, the CXL4-D which has full data logging capability, and the CXL4-DBG which has full data logging capability, Bluetooth™ connectivity and GPS.\u003c\/p\u003e \u003cp\u003eInnovative new features have been introduced and the popular existing modes of detection have been enhanced to allow the CXL4 Cable Avoidance Tool to successfully detect even the hardest to find pipes and cables. Particular attention has been paid to effect better working practices and to minimise the potential for human error to impact on operating performance.\u003c\/p\u003e \u003cp\u003eIMPROVED PERFORMANCE ACROSS ALL FOUR DETECTION MODES\u003cbr\u003eThe CXL4 Cable Avoidance Tool has improved performance across all modes of detection; Power, Radio, Generator and AllScan, whilst remaining easy to operate ensuring there is only a minimal need for training or retraining.\u003c\/p\u003e \u003cp\u003eSIMULTANEOUS DUAL-FREQUENCY\u003cbr\u003eThe simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOVERLOAD PROTECTION\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOptimised Locator Sensitivity and Noise Rejection means that the CXL4 can deal with the highest levels of background interference found, allowing even the weakest of signals to be detected successfully.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eINTELLIGENT NEW FEATURES:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eALARM ZONE\u003c\/strong\u003e\u003cbr\u003eAlarmZone™ alerts operators to the presence of particularly shallow pipes or cables with the exact trigger depth adjustable by the user to best suit local requirements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDYNAMIC SWING SENSOR\u003c\/strong\u003e\u003cbr\u003eThe Dynamic SwingSensor which gently alerts the operator if the locator is being swung excessively, potentially compromising the accuracy of any locates.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePEAKHOLD\u003c\/strong\u003e\u003cbr\u003ePeakHold allows operators to quickly and confidently pinpoint the exact position of buried services\u003c\/p\u003e \u003cp\u003eDATA LOGGING\u003cbr\u003eThe CXL4-D and CXL4-DBG Cable Avoidance Tools have full data logging capability. A years worth of data can be stored, in normal usage, on both the Cable Avoidance Tool and the SGV4 Signal Generator.\u003c\/p\u003e \u003cp\u003eDATA LOG TRANSFER via USB\u003cbr\u003eThis can be conveniently transferred at any time to supervisors for analysis via a USB cable to a PC (or wirelessly via Bluetooth™ from the DBG model only to a PC, tablet or smartphone).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDATA ANALYSIS\u003cbr\u003eC.SCOPE PC ‘TOOLKIT’ and ‘RELAY’ Smartphone App\u003c\/strong\u003e\u003cbr\u003eThe free-to-download C.Scope PC Toolkit and C.Scope Relay smartphone App analyses the stored data-logs into charts and graphs that illustrate all aspects of the use allowing training requirements to be quickly identified.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGPS\u003c\/strong\u003e\u003cbr\u003eThe CXL4-DBG with in-built GPS allows a record to be kept of exactly where the Locators have been used that can then be viewed in partnership with Google Earth™ or Google Maps™.\u003c\/p\u003e \u003cp\u003eTwelve months of GPS data is stored, in normal usage. This can be conveniently transferred at any time via a USB cable to a PC or wirelessly via Bluetooth™ to a PC, tablet or smartphone to supervisors for analysis. The free-to-download C.Scope PC Toolkit and Relay smartphone App analyses the stored data.\u003c\/p\u003e \u003cp\u003eAdditionally, the Locators can be paired to third party GPS Survey equipment, via the Locators in-built Bluetooth™ facilitating ‘one pass’ underground utility surveys to be undertaken.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCALIBRATION\u003c\/strong\u003e\u003cbr\u003eThe CXL4 Cable Avoidance Tools do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAUTOMATIC DAILY SELF TEST (ADST)\u003c\/strong\u003e\u003cbr\u003eThe CXL4 Cable Avoidance Tools perform an Automatic Daily Self Test (ADST). The ADST checks the functionality of the locator including the receiving aerials each day when it is first switched on. The SGV4 Signal Generator also performs a comprehensive Automatic Daily Self Test (ADST).\u003c\/p\u003e \u003cp\u003eAt the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.\u003c\/p\u003e \u003cp\u003eThe result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePRODUCT VALIDATION CERTIFICATION\u003c\/strong\u003e\u003cbr\u003eThese test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available. The PC Toolkit can also be used to view and print a copy of the original factory Calibration Certificate.\u003c\/p\u003e \u003cp\u003eC.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal requirements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHIGH RESOLUTION BACKLIT DIGITAL DISPLAY\u003c\/strong\u003e\u003cbr\u003eThe CXL4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates detection mode, signal peak level, depth, signal strength and battery condition. It also displays the Automatic Daily Self Test results.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDETACHABLE SPEAKER\u003c\/strong\u003e\u003cbr\u003eThe speaker can be easily detached for use in noisy work environments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eROBUST AND DURABLE CONSTRUCTION\u003c\/strong\u003e\u003cbr\u003eThe CXL4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSERVICE\u003c\/strong\u003e\u003cbr\u003eA complete covers off service \u0026amp; maintenance package is available for those customers who require it from C.Scope Authorised Service Centres.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTHREE YEAR WARRANTY\u003c\/strong\u003e\u003cbr\u003eThe CXL4 comes with a three year Warranty (conditions apply).\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55315508363606,"sku":null,"price":924.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"mxl4-locator","title":"MXL4-DBG LOCATOR","description":"\u003cp\u003eThe MXL4 Precision Locator represents a significant advance in cable detecting and tracing capabilities.\u003c\/p\u003e\u003cp\u003eThe MXL4-DBG which has full data logging capability, Bluetooth™ connectivity and GPS.\u003c\/p\u003e\u003cp\u003eInnovative new features have been introduced enabling the MXL4 Locator and MXT4 Transmitter to provide high-end precision performance and a far more flexible approach to pipe and cable location.\u003c\/p\u003e\u003cp\u003eIMPROVED PERFORMANCE\u003cbr\u003eThe MXL4 is able to quickly and accurately detect, pinpoint, trace and identify the widest range of pipes and cables.\u003c\/p\u003e\u003cp\u003eOVERLOAD PROTECTION\u003cbr\u003eOptimised Locator Sensitivity and Noise Rejection means that the MXL4 can deal with the highest levels of background interference found, allowing even the weakest of signals to be detected successfully.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMULTI-FREQUENCY\u003c\/strong\u003e\u003cbr\u003eThe MXT4 Transmitter now has a greater range of transmitting frequencies allowing improved long distance tracing and utility identification, even on the most congested of sites. A range of frequencies from 512\/640Hz up to 131kHz and including the simultaneous dual-frequency 33kHz and 131kHz signal output is ideal for maximising the number of buried services that can be energised and then detected. The MXL4 can apply these frequency signals without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDEPTH MEASUREMENT\u003c\/strong\u003e\u003cbr\u003eThe MXL4 when used alongside an MXT4 Transmitter will measure and indicate the depth of buried pipes, cables and sondes at the push of a button.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSIGNAL CURRENT MEASUREMENT\u003c\/strong\u003e\u003cbr\u003eThe MXL4 can monitor the true strength of the MXT4 Transmitter signal applied to a buried service irrespective of its depth. This is ideal for identifying the layout of a pipe or cable network.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eINTELLIGENT NEW FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALARM ZONE\u003c\/strong\u003e\u003cbr\u003eAlarmZone™ alerts operators to the presence of particularly shallow pipes or cables with the exact trigger depth adjustable by the user to best suit local requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDYNAMIC SWING SENSOR\u003c\/strong\u003e\u003cbr\u003eThe Dynamic SwingSensor which gently alerts the operator if the locator is being swung excessively, potentially compromising the accuracy of any locates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePEAKHOLD\u003c\/strong\u003e\u003cbr\u003ePeakHold allows operators to quickly and confidently pinpoint the exact position of buried services\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDATA LOGGING\u003c\/strong\u003e\u003cbr\u003eThe MXL4-D and MXL4-DBG Locators have full data logging capability. A years worth of data can be stored, in normal usage, on both the Locator and the MXT4 Transmitter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDATA LOG TRANSFER via USB\u003c\/strong\u003e\u003cbr\u003eThis can be conveniently transferred at any time to supervisors for analysis via a USB cable to a PC (or wirelessly via Bluetooth™ from the DBG model only to a PC, tablet or smartphone).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDATA ANALYSIS\u003cbr\u003eC.SCOPE PC ‘TOOLKIT’ and ‘RELAY’ Smartphone App\u003c\/strong\u003e\u003cbr\u003eThe free-to-download C.Scope PC Toolkit and C.Scope Relay smartphone App analyses the stored data-logs into charts and graphs that illustrate all aspects of the use allowing training requirements to be quickly identified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGPS\u003c\/strong\u003e\u003cbr\u003eThe MXL4-DBG with in-built GPS allows a record to be kept of exactly where the Locators have been used that can then be viewed in partnership with Google Earth™ or Google Maps™.\u003c\/p\u003e\u003cp\u003eTwelve months of GPS data is stored, in normal usage. This can be conveniently transferred at any time via a USB cable to a PC or wirelessly via Bluetooth™ to a PC, tablet or smartphone to supervisors for analysis. The free-to-download C.Scope PC Toolkit and Relay smartphone App analyses the stored data.\u003c\/p\u003e\u003cp\u003eAdditionally, the Locators can be paired to third party GPS Survey equipment, via the Locators in-built Bluetooth™ facilitating ‘one pass’ underground utility surveys to be undertaken.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCALIBRATION\u003c\/strong\u003e\u003cbr\u003eThe MXL4 Cable Avoidance Tools do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAUTOMATIC DAILY SELF TEST (ADST)\u003c\/strong\u003e\u003cbr\u003eThe MXL4 Locators perform an Automatic Daily Self Test (ADST). The ADST checks the functionality of the locator including the receiving aerials each day when it is first switched on. The MXT4 Transmitter also performs a comprehensive Automatic Daily Self Test (ADST)\u003c\/p\u003e\u003cp\u003eAt the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.\u003c\/p\u003e\u003cp\u003eThe result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePRODUCT VALIDATION CERTIFICATION\u003c\/strong\u003e\u003cbr\u003eThese test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available. The PC Toolkit can also be used to view and print a copy of the original factory Calibration Certificate.\u003c\/p\u003e\u003cp\u003eC.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHIGH RESOLUTION BACKLIT DIGITAL DISPLAY\u003c\/strong\u003e\u003cbr\u003eThe MXL4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates detection mode, signal peak level, depth, signal strength and battery condition. It also displays the Automatic Daily Self Test results.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDETACHABLE SPEAKER\u003c\/strong\u003e\u003cbr\u003eThe speaker can be easily detached for use in noisy work environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eROBUST AND DURABLE CONSTRUCTION\u003c\/strong\u003e\u003cbr\u003eThe MXL4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSERVICE\u003c\/strong\u003e\u003cbr\u003eA complete covers off service \u0026amp; maintenance package is available for those customers who require it from C.Scope Authorised Service Centres.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTHREE YEAR WARRANTY\u003c\/strong\u003e\u003cbr\u003eThe MXL4 comes with a three year Warranty (conditions apply).\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Default Title","offer_id":55316872364374,"sku":null,"price":1605.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"radiodetection-cat4","title":"Radiodetection CAT4 (strike Alert)","description":"\u003cp\u003e\u003cstrong\u003eDetect More, Detect Faster\u003c\/strong\u003e\u003cbr\u003eThe new C.A.T4 digital platform delivers highly refined locate capabilities, specifically designed to help the operator find more buried utilities. The C.A.T4 Avoidance Mode™ lets the operator check an intended excavation area for Power, Radio and Genny signals, and pinpoint located utilities in a single scan. Features such as the bargraph ‘tidemark’ enable an operator to quickly spot a peak response and zero-in on a buried conductor.\u003c\/p\u003e\u003cp\u003eThe new Genny 4 (optional), with a new integrated logic design, provides a class-first simultaneous dual-frequency signal output design. Alongside the familiar 33kHz locate signal for general purpose locates, the Genny 4 transmits a second frequency designed to facilitate location of small diameter cables such as telecoms and street lighting, including spurs. For tricky locates, the new power boost function enables the locate signal to travel further and deeper, and couple onto utilities more easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDig More Safely\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s proprietary StrikeAlert™ has been improved to reduce the number of shallow cable strikes. The C.A.T4 guides users towards better and safer working practices through its optional SWING™ Rate detector and Service Due date warning.\u003c\/p\u003e\u003cp\u003eOptional data acquisition capabilities allow Plant Supervisors to administer their fleet more safely and effectively by providing comprehensive logs of C.A.T4 usage for analysis and personnel development.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStrikeAlert™ \u003c\/strong\u003e(optional)\u003cbr\u003eMinimise the risk of hitting a shallow cable with the optional StrikeAlert™ which has been enhanced and optimised to reduce the instances of false warnings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDynamic Overload Protection\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s unique digital signal processing capabilities equips the C.A.T4 with the ability to reject electrical interference. Dynamic Overload Protection gives C.A.T4 series products the ability to continue operating in electrically challenging areas, such as near substations and under power cables, where other locators’ detection circuitry may be overloaded and no longer function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvoidance Mode™ \u003c\/strong\u003e\u003cbr\u003eSweep an area of Power, Radio and Genny signals simultaneously, saving time. C.A.T4 lets operators control the sensitivity of each mode\/signal, enabling buried utilities to be pinpointed in a single pass, while Real Sound provides audio feedback derived directly from the utility located, easing identification to maximise speed whilst maintaining safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eeCert™\u003c\/strong\u003e\u003cbr\u003eeCert provides a fast and thorough test of key circuitry elements within C.A.T4, and validates their validation performance against the original factory calibration over the internet.\u003c\/p\u003e\u003cp\u003eeCert™, activated through the C.A.T Manager software, provides a fast, thorough and convenient test of the key locating circuitry within C.A.T4, and validates its performance against the original factory calibration. Following an eCert test pass, a Radiodetection Calibration Certificate for that C.A.T4 can be printed or saved.\u003c\/p\u003e\u003cp\u003eWhat’s more, C.A.T Manager can reproduce the original factory calibration certificate, or any eCert certificates that it has produced, on demand.\u003c\/p\u003e\u003cp\u003eFor a complete maintenance package, Radiodetection also offers exhaustive factory-backed service and recalibration options including full mechanical integrity inspection and function testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Visibility Display with Backlight\u003c\/strong\u003e\u003cbr\u003eThe C.A.T4’s high visibility display helps to minimise the possibility of misreading critical information from the unit. The high contrast and automatic backlight illumination provide optimum visibility in all light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eC.A.T Manager™ Software\u003c\/strong\u003e (optional)\u003cbr\u003eC.A.T4 locators are supported with the dedicated C.A.T Manager software package. This Windows® PC program allows plant, fleet and site managers to minimise down time by performing software upgrades, sending a service request or reproducing calibration certificates. To match individual preferences or intended use, C.A.T Manager can disable or enable C.A.T4 features such as depth estimation and warnings. User-editable fields enable plant\/fleet codes and other details to be stored on the unit, simplifying records and traceability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenny4 Signal Boost\u003c\/strong\u003e\u003cbr\u003eThe Genny 4 offers, alongside its standard power mode, a Signal Boost feature which increases the output signal by up to 10 times allowing you to locate over extra distance and depth. Additionally, the simultaneous Small Diameter Locate frequency design aids detection of smaller cables including spurs.\u003c\/p\u003e","brand":"Radiodetection","offers":[{"title":"Default Title","offer_id":55316917354838,"sku":"10\/CAT4EN29","price":1012.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"radiodetection-gcat4-2","title":"Radiodetection GCAT4+","description":"\u003cp\u003e\u003cstrong\u003eDetect More, Detect Faster\u003c\/strong\u003e\u003cbr\u003eThe new C.A.T4 digital platform delivers highly refined locate capabilities, specifically designed to help the operator find more buried utilities. The C.A.T4 Avoidance Mode™ lets the operator check an intended excavation area for Power, Radio and Genny signals, and pinpoint located utilities in a single scan. Features such as the bargraph ‘tidemark’ enable an operator to quickly spot a peak response and zero-in on a buried conductor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDig More Safely\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s proprietary StrikeAlert™ has been improved to reduce the number of shallow cable strikes. The C.A.T4 guides users towards better and safer working practices through its optional SWING™ Rate detector and Service Due date warning.\u003c\/p\u003e\u003cp\u003eOptional data acquisition capabilities allow Plant Supervisors to administer their fleet more safely and effectively by providing comprehensive logs of C.A.T4 usage for analysis and personnel development.\u003c\/p\u003e\u003cp\u003eC.A.T4 is a safety-critical precision instrument and the optional 30-day countdown to the Service Due date, CALSafe™ and innovative eCert™ on-line system calibration validation capabilities are designed to reinforce company and recommended service policies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eData Acquisition\u003c\/strong\u003e\u003cbr\u003eeC.A.T4™ series products can store over a year’s worth of the key measurements and modes of operation. C.A.T Manager™ can be used to export log files to enable detailed data usage analysis offering multiple benefits such as identifying training and development needs, and providing independent historical records of the instrument’s use. Backed-up data on a PC gives virtually unlimited record keeping for the life of the product.\u003c\/p\u003e\u003cp\u003egC.A.T4 units are equipped with an internal GPS\/GNSS receiver providing positional data logged every second into the C.A.T4 internal memory and showing where the operator was working. gC.A.T4 data logs can be exported as CSV, XLM or KML files that can be imported into map services like Google Maps® or Google Earth®.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDynamic Overload Protection\u003c\/strong\u003e\u003cbr\u003eRadiodetection’s unique digital signal processing capabilities equips the C.A.T4 with the ability to reject electrical interference. Dynamic Overload Protection gives C.A.T4 series products the ability to continue operating in electrically challenging areas, such as near substations and under power cables, where other locators’ detection circuitry may be overloaded and no longer function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvoidance Mode™ \u003c\/strong\u003e\u003cbr\u003eSweep an area of Power, Radio and Genny signals simultaneously, saving time. C.A.T4 lets operators control the sensitivity of each mode\/signal, enabling buried utilities to be pinpointed in a single pass, while Real Sound provides audio feedback derived directly from the utility located, easing identification to maximise speed whilst maintaining safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eeCert™\u003c\/strong\u003e\u003cbr\u003eeCert provides a fast and thorough test of key circuitry elements within C.A.T4, and validates their validation performance against the original factory calibration over the internet.\u003c\/p\u003e\u003cp\u003eeCert™, activated through the C.A.T Manager software, provides a fast, thorough and convenient test of the key locating circuitry within C.A.T4, and validates its performance against the original factory calibration. Following an eCert test pass, a Radiodetection Calibration Certificate for that C.A.T4 can be printed or saved.\u003c\/p\u003e\u003cp\u003eWhat’s more, C.A.T Manager can reproduce the original factory calibration certificate, or any eCert certificates that it has produced, on demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSWING™\u003c\/strong\u003e\u003cbr\u003eRadiodetection C.A.Ts are designed to respond exceptionally fast to even the smallest detectable underground signals. Radiodetection’s research into underground signal detection has shown that the ability of an operator to identify these buried utilities is directly affected by careless working practices such as excessive or rapid swinging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Visibility Display with Backlight\u003c\/strong\u003e\u003cbr\u003eThe C.A.T4’s high visibility display helps to minimise the possibility of misreading critical information from the unit. The high contrast and automatic backlight illumination provide optimum visibility in all light conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenny4 Signal Boost\u003c\/strong\u003e\u003cbr\u003eThe Genny 4 offers, alongside its standard power mode, a Signal Boost feature which increases the output signal by up to 10 times allowing you to locate over extra distance and depth. Additionally, the simultaneous Small Diameter Locate frequency design aids detection of smaller cables including spurs.\u003c\/p\u003e","brand":"Radiodetection","offers":[{"title":"Default Title","offer_id":55316922204502,"sku":"10\/GCAT4+EN03","price":1662.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"vloc3-pro-receiver-vivax","title":"vLoc3-Pro Receiver Vivax","description":"\u003cp\u003eThe \u003cstrong\u003evLoc3-Pro\u003c\/strong\u003e utility locator introduces new innovative tools for locating buried utilities assuring damage prevention whilst gathering information for analysis.\u003c\/p\u003e\u003cp\u003eWith two sets of screened 3D antennas signal distortion is easily detected and displayed on the bright full colour display. Along with classic locate screens the vLoc3 series locators offer new locate perspective screens of Vector Locate for fully automatic non-walk over locating, Transverse Graph showing both peak and null simultaneously providing immediate measurement of signal distortion, Plan View showing the relative orientation of the cable at any angle, and a new graphical Sonde screen with guidance arrows leading to the sonde location even when it is vertical.\u003c\/p\u003e\u003cp\u003eThe highly user configurable vLoc3 series contains eight passive locate modes, fault-find mode, SD (showing direction of outgoing current), and a range of configurable frequencies from 98Hz to 200 kHz. Audio and mechanical vibration alerts can also be configured by the user providing warnings for shallow depth, overload, overhead cables, and excessive swinging. Plug-in-play options for the receiver include optional Bluetooth module useable with external GPS devices and EMS foot to locate buried markers.\u003c\/p\u003e\u003cp\u003evLoc3-Pro Brochure  \u003ca href=\"https:\/\/reconsurveyandsafety.co.uk\/wp-content\/uploads\/2024\/10\/vloc3-pro-sales-sheet_1.pdf\"\u003evloc3-pro-sales-sheet_1\u003c\/a\u003e\u003c\/p\u003e","brand":"Recon Survey \u0026 Safety","offers":[{"title":"Locator Only","offer_id":55317014806870,"sku":null,"price":1942.99,"currency_code":"GBP","in_stock":true},{"title":"Transmitter","offer_id":55317014839638,"sku":null,"price":2992.99,"currency_code":"GBP","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1060\/4530\/9270\/collections\/image_5_ridgid_ca300_camera_1_c1f0dea0-2041-41f4-b45a-48c5cb023e9c.jpg?v=1790025350","url":"https:\/\/reconsurveyandsafety.co.uk\/collections\/locators.oembed","provider":"Recon Survey \u0026 Safety","version":"1.0","type":"link"}