Supplying UK trades for over 28 years

01522 697777

Mon–Fri 8:30–17:00

Hire from Lincoln

Equipment hire

Rotating lasers, pipe lasers, digital levels, cable avoidance tools and detectors, hired by the day or the week from our Lincoln depot. Everything goes out freshly calibrated with a certificate, charged batteries and the case, so it is ready to work the minute it lands on site.

  • Every instrument goes out calibrated and certified
  • Same-day collection from Lincoln on most kit
  • Delivery to site across the East Midlands
Rotating laser set up on a tripod on a building site

The hire fleet

The kit you need for the length of the job

Current-model instruments from the brands we sell and service, kept on a rolling calibration schedule. If what you need isn't listed, ring us

  • Rotating lasers

    Self-levelling and grade rotators from Topcon and Spectra, supplied with receiver, staff clamp and tripod for groundworks, formwork and steel.

    Hire a rotating laser
  • Grade Lasers

    Topcon & Spectra grade lasers

    Hire a grade laser
  • Pipe lasers

    Grade-setting pipe lasers with the remote, target and invert plate for drainage runs. Grade is set to your figure before it leaves the counter.

    Hire a pipe laser
  • Automatic levels

    Optical dumpy levels with a 5 m E-pattern staff and tripod. The straightforward choice for setting out and checking levels on a small site.

    Hire a level and staff
  • Cable avoidance tools

    Radiodetection and C.Scope CAT and Genny pairs, calibrated and certified within the year, as most sites now ask for at induction.

    Hire a CAT and Genny
  • Receivers

    Spare laser receivers, plus machine-mounted receivers for excavators and dozers, hired on their own or alongside a laser.

    Hire a receiver
  • Confined Space Hire

    Essential equipment for confined space working including access equipment and breathers. Collection ONLY or local delivery in the East Midlands

    Call to discuss hire

How hire works

From a phone call to kit on site

  1. Call or enquire

    Tell us what the job is, when you need the kit and for how long. We'll confirm availability and the rate the same day.

    Send a hire enquiry
  2. We prepare and calibrate

    The instrument is checked on the test range, the batteries are charged and the certificate goes in the case with it.

  3. Collect or have it delivered

    Pick it up from the counter in North Hykeham, or we'll deliver to site across Lincolnshire and the East Midlands. Courier further afield.

  4. Return or extend

    Bring it back when the job is done, or ring us to keep it on. Extensions are charged at the same rate, with no penalty for running over.

Spectra Precision rotating laser from the hire fleet, checked and ready to go out

Same dayCollection from Lincoln

What's in the case

Everything you need to start work, nothing to buy on the way

Each hire goes out as a complete working kit, not just the instrument. We check the whole lot against the manufacturer's tolerance on our own test range before it leaves, so a hired laser reads the same as one you own.

  • Calibration certificate
  • Charged batteries + charger
  • Fitted carry case
  • Receiver, staff and tripod
  • Quick-start sheet for the model
  • Flexible hire periods & pricing

Hire terms

The short version of the small print

  • Minimum one week

    Hire is charged at one week minimum then by the day thereafter. Bulk rates are available for long term hire, call to discuss

  • ID and a deposit

    First-time hirers bring photo ID and proof of address. We take a card deposit on the kit, refunded in full when it comes back complete.

  • Damage and loss

    Fair wear is expected. Loss, theft or a drop that needs a repair is charged at cost, so check the kit is covered on your site insurance.

  • Running over

    Ring us if the job overruns and we'll extend at the same rate. Kit returned late without a call is charged at the day rate until it's back.

Questions

What people ask before they hire

The questions we answer most often at the counter.

Can I hire for a single day?

No. One week is the minimum and most of the fleet is available at short notice. Ring before 15:00 and you can usually collect the same afternoon.

Is the kit calibrated when I collect it?

Every instrument is checked on our test range before each hire and goes out with a dated, serial-numbered calibration certificate in the case. Main contractors accept it in the same way as a certificate for your own kit.

Do you deliver to site?

We deliver on the van across Lincolnshire and the East Midlands, normally next working day, and we can send kit by insured courier anywhere in the UK. Carriage is quoted when you book.

What if the job runs over?

Ring us and we'll extend the hire at the same rate. There is no penalty for extending as long as you let us know before the return date.

What happens if the equipment is damaged?

Normal site wear is expected and not charged. If an instrument comes back needing a repair we quote the work at cost, and lost or stolen kit is charged at its replacement value. Most site policies cover hired-in plant, so it is worth checking yours before you collect.

Can hire count towards buying the instrument?

Often, yes. If you decide to buy the same model within the hire period we can put part of the hire charge towards the purchase price, new or reconditioned. Ask when you enquire and we'll confirm the figure in writing.

Ready when you are

Get the kit booked for your next job

Tell us what you need, when and for how long. We'll confirm availability and the rate the same day, and have it ready to collect or on the van.

Your basket

Your basket is empty

Add something from the shop, or call us on 01522 697777 and we will sort it for you.

Shop all products