At Recon Survey & Safety we provide a MSA Altair Calibration service. This is because it is vital to ensure your units comply with legal requirements and regulations. Manufacturers of Gas monitors recommend that they are calibrated every 6 months, against reference test gases that are traceable to National Physical Laboratory standards. To ensure the integrity of the sensors and confirm that the gas detector will alarm in the event of a toxic or flammable gas exposure. It may however be necessary for the frequency to be increased where continual exposure to the target gases is experienced.
Our engineers are fully trained and competent in tMSA Altair Calibration. Manufacturers MSA Altair and BW.
On receipt of your portable gas detector We will carry out a full inspection and calibration of the unit. Upon inspection of the unit. If any errors or sensor replacement is required we will contact you with a quotation to carry out any additional work. If at this point the gas detector is deemed as being not cost effective to repair due to multiple sensor failure, we will offer you the option to replace the unit with a new gas monitor at a competitive rate. Once your gas monitor has passed its MSA Altair Calibration we will issue a test certificate and return the gas monitor to you.